The sensor light offers smart and efficient lighting with built-in PIR sensor and identifies day and night automatically so auto-on only at night and when motion is detected. Providing you and your family safety and more convenient for daily activities.
Light Source: LED
Color Temperature: White (5500K-6500K)
Power Consumption: 0.3W
Input Voltage: DC 4.5V
Powered by: 3*AAA batteries (not included)
Switch Type: Light-operated + motion detection
Detection Angle: 100 degrees in the front
Detection Range: 3 meters
Net Weight (each and every): 85g
- Please do not install 2 lights too close from each and every other. The lighting may cause the other one does not work.
- Please do not install this light in high temperature place, differently, high temperatures will have an effect on the adhesive strip, and then the light will slide easily!
- This light can only be turned on in darkness environment. (make sure test the light at dark, it would possibly not light up at daytime/in sufficient light)
- It will be most often on if motion is detected all of the way within the detection area.
- Working temperature ranges from 5’C to 30’C, high temperature above 30’C will have an effect on the sensitivity of switch and low temperature may cause malfunction.
- Please make sure the position before installation, the double-sided adhesive is unmovable.
3x Motion Sensor Lights
3x Iron Sheets
3x Double-sided Adhesive Tapes
1x User Manual
Super Bright: The motion sensor light consists of 6 high-brightness LED bulbs with lumen up to 30LM, which is bright enough to keep you away from stumbling when you cross the entrance at night.
Intelligent Lighting: Built-in PIR motion sensor to detect your motion within 3M/9.8ft and angle of 100 degrees right ahead so that you could light your path automatically in the dead of night and auto-off after 20 seconds of state of being inactive.
Surrounding Awareness: Designed with light sensor for automatic lighting at dark when motion is detected. Save power and offer efficient illumination when necessary.
Battery Powered: Powered by replaceable 3xAAA batteries (not included) per motion sensor light. Providing lighting where limited or inability to access to electricity.
Simple Installation: Installation is easy that you’ll use the super-strong double-sided 3M adhesive pad or stick to any metal surface with the built-in magnet, widely applied to entrance, stairs, hallway, basement, garage, bathroom, kitchen, cabinet, closet and more.