Description
J-B Weld ClearWeld Syringe
ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of lower than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For easiest results use a detergent or degreaser to first clean the outside, then roughen surface with file or coarse sandpaper to give you the easiest repair.
2. Mix: After casting off the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in america
Crystal clear epoxy sets in 5 minutes and cures in 1 hour
Great for tile, most plastics, ceramic, glass, wood, metal and more
Tensile strength of 4400 PSI for a strong, permanent bond
No mess, no waste cap screws on one technique to get rid of accidental mixing and make sure it may not dry out
J-B Weld is proudly made in america