Description
This can be a Bluetooth 4.0 module with 4pin base board that may Improve iphone4s or later.
But does not Improve the version is less than the android 4.3 phone(it don’t Improve classic bluetooth 2.0 spp features)
The core module is HM-10
Base board from DSD TECH
Operating voltage: 3.3V to 6V
How to Enable Apple Notification Center Service (ANCS) ANCS function
1.1 Please read apple notification ducument first
1.2 Send AT+TYPE3 command change to AUTH and BOND mode.
1.3 Send AT+ANCS1 command to open ANCS.
1.4 Send AT+PASS[para1] command to set passcode. Default passcode is “000000”
1.5 Send AT+RESET to restart module.
Now You’ll be able to use LightBlue to scan and made a connect with module.
iOS will ask you input passcode. please input your passcode value.
If all is okay, you must receive AT+ANCS[para1] command from module UART.
About HM-10 Module
Core module is the original HM-10 module, not fake. DSD TECH brand guarantees and we accept refund without any excuse.
WARRANTY
We back this item with ONE YEAR WARRANTY. If you meet any question, please contact us, we can fix your issue within 24 hours.
Low Energy: With HM-10 bluetooth 4.0 module, You’ll be able to add Bluetooth features to your project and Improve iphone4s or later.
DSD TECH Brand 4pin Base Board: Through this base board, ends up in VCC, GND, TX, RX. You’ll be able to be very convenient to connect with your arduino project
Led status indication: when the connection is established will at all times light, disconnection is flash
iBeacon Improve:You’ll be able to make this module into ibeacon mode.So You’ll be able to have your own ibeacon.it also Supports Apple Notification Center Service (ANCS)
working voltage 3.6 V to 6V,Default rate of 9600. DSD TECH back this Bluetooth 4.0 LE module with ONE Year WARRANTY. If you meet any question, please contact us, we can fix your issue within 24 hours.