Description
J-B Weld Original Cold-Weld Formula Steel Reinforced Epoxy
J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and more than one surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and Can also be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It may resist temperatures as much as 550ºF when fully cured.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best possible results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to give you the best possible repair.
2. Mix: Squeeze equal parts from every tube onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.
J-B Weld is proudly made in the united states
The Original J-B Weld two-part epoxy cold weld system
Great for household repairs, automotive projects, plumbing and marine applications, crafts and more
Sets in 4-6 hours at room temperature and cures dark grey in 15-24 hours and rated at a tensile strength of 3960 PSI
Once cured it forms a permanent bond and Can also be shaped, tapped, filed, sanded and drilled and will resist temperatures of as much as 550 degrees Fahrenheit
J-B Weld is proudly made in the united states
Will set in 4-6 hours, and cure in 16-24 hours
Water resistant, petroleum, chemical, and acid resistant when fully cured
Can also be drilled, tapped, machined, filed, sanded and painted
Stong and nontoxic after it has set and temperature resistant as much as 500F
Tensile strength is 3,960 PSI